|After Service Provided:||Video Technical Support, Field Installation||Type:||Laminating Machine|
|Application:||Printing Factory, Carton Packaging Factory||Condition:||New|
Fully Automatic High Speed Flute Laminator Machine,
High Speed Flute Laminator Machine 160m/Min,
160m/min sheet to sheet laminator
Fully Automatic High Speed Intelligent Flute Laminator Sheet To Sheet Laminating Machine
1. Model Overview
The machine is suitable forpaperboard and corrugated paper, cardboard, and motion controller and servo correction system. By using the relative positions of multiple sets of photoelectric induction paper, the servo motor on both sides of the control paper is independently compensated, and the position of the paper is tracked to make the paper and the bottom paper accurately positioned. The intelligent high-speed laminating machine is easy to oprate, and you can adjust the paper size automatically by one-touch.
A. Upper Paper Feeder: It can send stacks of 120-800gsm paper from above.
B. Bottom feed: It can send 0.5~10mm paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed paper.
D. Regulatory organization - Fits the two papers according to the set tolerances.
E. Pressurizing Conveyor... Presses the attached paper and conveys it to the delivery section.
|Top sheet thickness||150-800g/㎡|
|Bottom sheet thickness||≤10mm ABCDEF corrugated board ≥300gsm cardboard|
1. BOTTOM PAPER FEEDING
Use imported Servo motor electric controlling system, with Japan NITTA suction belt to make suction power inverter, and belt cleaned by water roller; Patented technology to ensure corrugate and cardboard goes out smoothly and simple operation.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed auto dedicated feeder, both paper lifting and feeding nozzle can freely adjust angle to the paper, to ensure that whether thick or thin paper can be delivered rapidly and smoothly.
3. ELECTRICAL SYSTEM
Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve efficiency.
The special design of the pre stack paper frame, save time and effort.
With imported double teeth belt drive and Switzerland ROSTA tension device ensure the drive accurate, stable and low noisy.
6. POSITIONING SYSTEM & GLUE ROLLER
The use of multiple sets of photoelectric sensor at bottom sheets relative position, control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.
Stainless steel roller, never rust, after narrowly grinding,
guaranteed the minimum amount glue coated evenly.
Down roller be cleaned by water roller.
7. TOUCH SCREEN OPERATION SYSTEM
It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot
Contact Person: Mr. Tracy Feng