|Maximum Sheet Size:||1700X1700mm||Minimum Sheet Size:||360X400mm|
|Top Sheet:||120-800g||Bottom Paper Thickness:||0.5-10mm Corrugated ≥300g Cardboard|
150m/Min Flute Lamination Machine,
Flute Lamination Machine 25KW,
1700mm flute laminating machine
Easy Operation High Speed Flute Lamination Machine
The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.
A. Top sheet Feeder: It can send stacks of 120-800gsm paper from above.
B. Bottom sheet feeder: It can send 0.5~10mm Corrugated/paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed paper. Glue roller is stainless steel.
D. Calibration structure-Fits the two papers according to the set tolerances.
E. Pressing Conveyor: Presses the attached paper and conveys it to the delivery section.
The frames of this series of products are all processed at one time by a large-scale machining center, which ensures the accuracy of each station and ensures more stable operation of the equipment.
|Model||ZGFM 1500||ZGFM 1700|
|Bottom paper||≤10mm ABCDEF corrugated board ≥300gsm cardboard||≤10mm ABCDEF corrugated board ≥300gsm cardboard|
Applicable materials for laminating:
Paste paper --- 120 ~ 800g/m thin paper, cardboard.
Bottom paper---≤10mm corrugated ≥300gsmpaperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.
Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.
Adopting the world's leading transmission control system, input paper size and system will auto-tuning
Computerized high-speed laminating, up to 12,000 pieces per hour.
Stream-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.
Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker
Use multiple sets of sensors to detect the advance position of the bottom line, and make the servo motor on both sides of the top paper to independently rotate to compensate the upper and lower paper alignment, which is accurate and smooth.
Full-function electronic control system, using human-machine interface and PLC program model display, can automatically detect operating conditions and work records.
Automatic glue replenishment system can automatically compensate for lost glue and cooperate with glue recycling.
ZGFM high speed laminating machine can be connected with automatic flip flop stacker to save labor.
1.BOTTOM SHEET FEEDING
Use imported Servo motor controlling system, with Japan NITTA suction belt and big air blower to ensure smooth feeding of 2ply, 3ply, 4ply, 5ply and cardboard.
2.TOP SHEET FEEDING MECHANISM
Both paper lifting and feeding nozzle of high speed auto dedicated feeder can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump, ensure top feeding paper run fast and smoothly.
Mainly using Siemens electric system to ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information on the screen.
4. POSITIONING SYSTEM & GLUE ROLLER
The use of multiple sets of photoelectric sensor at bottom sheets relative position,
control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.
Contact Person: Tracy Feng