Product Details:
|
Maximum Sheet: | 1700X1700mm | Minimum Sheet: | 360X400mm |
---|---|---|---|
Accuracy: | ±1mm | Power: | 25KW |
Top Sheet: | 120-800g | Bottom Paper Thickness: | 0.5-10mm Flute Above 300g Cardboard |
High Light: | High Speed flute laminator,flute laminator Automatic,1700mm litho laminator |
Automatic ZGFM-1700 High Speed Carton Box Flute Lamination Machine
INTRODUCTION:
1.1 Function:
The paper can be laminated with paperboard to increase the strength and thickness of the material or special effects. After the die-cutting, it can be used for packaging boxes, billboards and other purposes.
1.2 Structure:
A. Top sheet Feeder: It can send stacks of 120-800gsm paper from above.
B. Bottom sheet feeder: It can send 0.5~10mm Corrugated/paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed paper. Glue roller is stainless steel.
D. Calibration structure-Fits the two papers according to the set tolerances.
E. Pressing Conveyor: Presses the attached paper and conveys it to the delivery section.
The frames of this series of products are all processed at one time by a large-scale machining center, which ensures the accuracy of each station and ensures more stable operation of the equipment.
Parameters:
Model | ZGFM 1500 | ZGFM 1700 |
Max size | 1500*1500mm | 1700*1700mm |
Min size | 360*380mm | 360*400mm |
Top Paper | 120-800g | 120-800g |
Bottom paper | ≤10mm ABCDEF corrugated board ≥300gsm cardboard | ≤10mm ABCDEF corrugated board ≥300gsm cardboard |
Max speed | 150m/min | 150m/min |
Power | 25kw | 27kw |
Stick accuracy | ±1mm | ±1mm |
1.3 Principles:
The top sheet is sent out by the upper feeder and sent to the start detector of the positioning device. Then the bottom sheet is sent out; after the bottom paper is coated with glue, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the top and bottom sheet, servo compensation device on both sides of the paper adjusts the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.
1.BOTTOM SHEET FEEDING
Use imported Servo motor controlling system, with Japan NITTA suction belt and big air blower to ensure smooth feeding of 2ply, 3ply, 4ply, 5ply and cardboard.
2.TOP SHEET FEEDING MECHANISM
Both paper lifting and feeding nozzle of high speed auto dedicated feeder can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump, ensure top feeding paper run fast and smoothly.
3.ELECTRICAL SYSTEM
Mainly using Siemens electric system to ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information on the screen.
4. POSITIONING SYSTEM & GLUE ROLLER
The use of multiple sets of photoelectric sensor at bottom sheets relative position,
control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.
Contact Person: Tracy Feng
Tel: +8617555000590
Fax: 86-550-7131177