|
Product Details:
|
| Maximum Sheet: | 1500X1500mm | Minimum Sheet: | 360X380mm |
|---|---|---|---|
| Accuracy: | ±1mm | Power: | 20KW |
| Top Sheet: | 120-800g | Bottom Paper Thickness: | 0.5-10mm Flute Above 300g Cardboard |
| High Light: | High Accuracy automatic flute laminator machine,automatic flute laminator machine 1500mm,20KW corrugated box lamination machine |
||
Automatic High Accuracy Flute Lamination Machine
INTRODUCTION:
The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.
Parameters:
| MODEL | GFM-1500A | GFM-1700A |
| Max Sheet | 1500×1500mm | 1700×1700mm |
| Min Sheet | 360×380mm | 360×400mm |
| Top Paper Thickness | 120-800g | 120-800g |
| Max Speed | 150m/min | 150m/min |
| Fitting Precision | ±1mm | ±1mm |
| Machine Power | 22KW | 25KW |
| Bottom Paper Thickness |
≤10mm(A-F corrugated board) ≥300g cardboard |
≤10mm(A-F corrugated board) ≥300g cardboard |
1.BOTTOM SHEET FEEDING
Use imported Servo motor electric controlling system, with Japan NITTA suction
belt to make suction power inverter, Patented technology to ensure corrugate and cardboard goes out smoothly and simple operation.
2.TOP SHEET FEEDING MECHANISM
Both paper lifting and feeding nozzle of high speed auto dedicated feeder can be freely adjusted to be adapted to both thin and thick paper. Together with Becker pump, ensure top feeding paper run fast and smoothly.
3.ELECTRICAL SYSTEM
Mainly using Siemens electric system to ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information on the screen.
4. POSITIONING SYSTEM & GLUE ROLLER
The use of multiple sets of photoelectric sensor at bottom sheets relative position,
control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.
Contact Person: Tracy Feng
Tel: +8615905504590
Fax: 86-550-7131177
