MOD 5370BSC
Product Name:Auto Slit-Cut creaser

5370BSC is a Auto feed slit cut creaser,with at most 16 crease,16 cuts and 6
slit,barcode and register line reader is available

Why slit and cut?
On a big digital print,it usually is not a whole big print ,but several pieces
of small graph(Business card cutter and so on).The slit and cut is
neccessary to grab the small graph from the whole print.

Why crease?

On digital print,

the paper grain will need to be gently broken to allow a
clean fold, otherwise unsightly cracks will appear. The bar creaser allows
you to gently do this to allow for a perfect crack-free fold.

what the slit-cut creaser can do

Crease is under the control of software, colourful touch screen, sensors;
executes with precise step motors, rollers, the screen interface is friendly and
operation is easy

CREASE UNIT
ParametersCrease
in one pass: 1-16 / sheet
Min crease spacing: 0.2mm
Feeding paper: Min 140mm*150mm max370mm*650mm
Cut paper: Min 48mm*50mm max 370mm*650mm
GSM: 110-350gsm
Speed: 15-24/min (A3 to A5,with one crease)
Tolerance: ±0.2mm

SLIT-CUTTER UNIT
Parameters
Slit: 6 slitter 2 for edges,4 in middle
Cut: 1-16 times in one pass
Accuracy:0.2mm
Min output:45*50mm (without crease unit)
Slit output: Min 3mm max15mm
Front scrap: Min 3mm max16mm
Back scrap: Min 3mm max17mm
Longtitude gutter:Min3mm max18mm
Latitude gutter: Min3mm max19mm
Vol/Frq: 220V 50/60HZ

Features
-Mark and barcode read available
-Ultrasonic device for double feed detection
-Trash box for strips recycle
-Colorful screen and more visualized interface, you can see the process
result after program.
-Shrink and stretch compensation

CONTROL PANEL UNIT
It is normally located on the feeder module. the LCD touch screen is for all
functions, able display92 nameable memories, buttons for speeds,
Technical menu and Several language options(GERMAN/FRENCH).
the Software is expandable to accept other modules later on
including Japanese electronic components. It will be delivered with protective
plastic film and has been CE certificated for full system.
Power 12v dc 25w from feeder power supply

AUTO FEED UNIT
Suction bottom feed
Pile height 4 cm (depending on paper type size)
-Feeding by the auto feeder can be done continuously loading the
pile.handle paper 100-400gsm (including single or double laminated or UV
coated paper)
Adjustable paper separator, general air blast individual orifices, air suction
angle,feed speed frequency.
Right side Registration belt
Feeding paper tail sensor for acceleration

Features
-Highest quality dual stage compressor with separate circuits. almost no heat
in the compressed air, which means better sheet separation.
-Feed roller with extra sticky rubber rings radial plenums for better paper grip.
-Stand with 4 lockable casters.
-You can start by buying the top head as a manual feed
unit, add the auto feed system later with stand as you wish.